Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

FOLLOW STEPS TO GET CONNECTED:

Step 1: Locate your ONT box. This is the box where your modem router should be connected, and it is normally found close to your wardrobe. It

The ONT box could be black or white.

For the Black ONT Box,
please make sure that the cable is connected to Port 1, while the other end of the cable is connected to the WAN port of your modem router.

Sample for Black ONT box:

...

For the White ONT Box, there
There is only one Ethernet port below the white ONT box; make sure that the other end of Please ensure that the cable is connected to the WAN port from the back of your modem router.firmly

Sample for White ONT box:

...

Step 2: Connect the cable from your the ONT box going to the modem router should only be connected to the WAN port.

Sample WAN port from a TPLink and DLink modem.

...

Please use the provided cable that came with your modem router or the cable that is already connected to your ONT Box.

Once all cables are in the right place, you need to be able to access the modem router page to register your modem user name and password.

Connect Box to your router. Connect the cable to your WAN/LAN Port.

HX510 Whole home Mesh WIFI System Example

...

Archer C20 example

...

Step 3: Once you have connected all cables correctly, you will need to access the router Admin Portal page to register your modem with the username and password provided.

You can connect your laptop or PC to your modem router via wireless or Ethernet cable (take note that you still don't have internet access, it will normally say "no internet access").

Check the back or bottom part of the modem router for the Wi-Fi username and password for a wireless connection.

Once your device is connected via Wi-fi or Ethernet cable you may now access the modem admin page by using the IP address of the modem router to access its settings.

Please see the manual instructions that came with the modem. Some modems has application refer to your routers manual for further instructions.

The most common router IP address may be the following http://192.168.0.1 or http://192.168.1.1 or http://192.168.88.1 (NEW Routers ie HX510)

Note: Some modems have applications that you can install using your mobile phone. You may follow instructions from your mobile modem application instructions.Please see few modem settings samples below.

Using the following public tutorials

How to log into router ADMIN Page -

...

TP-Link Archer C4000

...

D-Link AC750

...

TP-Link VR1600v

...


TP LINK setup using app -

...


TP Link Setup HX510 -

...


TP Link Setup using web browser -

...

For more Router samples and instructions Please see visit the Click here.