Setting up your Internet

FOLLOW STEPS TO GET CONNECTED:

Step 1: Locate your ONT box. This is the box where your router should be connected, it is normally found close to your wardrobe.

The ONT box could be black or white.

For the Black ONT Box
please make sure that the cable is connected to Port 1, while the other end of the cable is connected to the WAN port of your modem router.

Sample for Black ONT box:

For the White ONT Box
There is only one Ethernet port below the white ONT box; Please ensure that the cable is connected firmly

Sample for White ONT box:

Step 2: Connect the cable from the ONT Box to your router. Connect the cable to your WAN/LAN Port.

HX510 Whole home Mesh WIFI System Example

Archer C20 example

Step 3: Once you have connected all cables correctly, you will need to access the router Admin Portal page to register your modem with the username and password provided.

You can connect your laptop or PC to your modem router via wireless or Ethernet cable (take note that you still don't have internet access, it will normally say "no internet access").

Check the back or bottom part of the router for the Wi-Fi username and password for a wireless connection.

Once your device is connected via Wi-fi or Ethernet cable you may now access the modem admin page by using the IP address of the router to access its settings.

Please refer to your routers manual for further instructions.

The most common router IP address may be the following http://192.168.0.1 or http://192.168.1.1 or http://192.168.88.1 (NEW Routers ie HX510)

Note: Some modems have applications that you can install using your mobile phone. You may follow instructions from your mobile modem application instructions.

Using the following public tutorials

How to log into router ADMIN Page -

TP LINK setup using app -

TP Link Setup HX510 -

TP Link Setup using web browser -

For more Router samples and instructions Please see visit the Click here.